* Basic Residential & Commercial Cleaning Package – BRILLIANT NEW hybrid carbon non-round Aero Control CAD 6m pole, 12.5L GO H2O Pro DI System with detergent dispenser on all-in-one trolley with removable compact hose reel & 80m hose, 8” brush and everything else you need!

Featuring the brilliant new CAD pole in hybrid carbon

Package includes:

– 12.5 litre GO H2O Pro De-ionisation System on All-In-One trolley with detergent dispenser and removable compact hose reel & 80m 14mm hose. Featuring the new ‘McLennan’ head with ergonomic handle and ports for multiple outlets. Premium reinforced, durable 14mm hose on a lightweight metal reel that can be mounted on your DI trolley or used lift & carry.
– 5L Wash & Rinse detergent. Specially formulated for use with the DI System, this Wash & Rinse detergent is low foaming and will rinse naturally as you clean, taking no longer to apply than pure water. Pre-diluted with pure water to give you a spot-free finish. The cleaning power you need when water fed cleaning
– 12.5 litres Mixed Bed Resin. Premium, long-lasting Thermax resin to remove dissolved solids and dry spot-free
– 7″ 5 Micron Carbon Pre-filter. To maximise resin exchange capacity
– 6m (20′) Aero CAD Control Pole – 6 section, non-round, hybrid carbon, compact pole. The perfect pole for 1-2 storey residential and commercial work, climbing ladders and working in confined spaces. 1.23m closed length! Featuring removable clamps and sections and Kevlar wear pads under all clamping points. Build the pole up to 3 storeys with the Aero CAD Control Extension 1 and 4 storeys with the Aero CAD Control Extension 2
– 8″ Shifter 220 Glass Brush with built-in rinse bar – Designed for maximum filament contact with the glass, a brush that works like a scrubbing pad. Incredibly light with maximum scrubbing power. Easy rinse
– TDS meter. For checking the total dissolved solids reading of the input and output water. After running through the DI it’ll be 0, resulting in no spotting on the windows or panels
– Inline Pressure Gauge. Sturdy metal gauge that will measure water pressure up to 150psi
– Hose leader. To connect DI system to the hose reel
– 9m Pole Hose. Runs through the middle of your pole to ensure no snagging
– Pole Hose Valve to Pushfit Connector. Control the flow of water at the base of your pole without having to go back to your water source or DI system. Heavy duty!
– 8mm Joiner. Leave your pole hose in the pole when you pack up, saving you time in feeding pole hose through the pole each time you set up.
– Wiel-Loc Angle Adapter. Angle your brush head for the desired reach for hard-to-get windows or back panels. 10″ reach with ability to use on any brush socket or pole end and add two arms